Denford Software & Machines

Denford Software & Machines

 
 

Denford Software & Machines

Welcome to the Denford CAD CAM CNC forum


Hint - Try the google search at the bottom of the page
It is currently Mon 23 Oct , 2017 18:05 pm

All times are UTC [ DST ]




Post new topic Reply to topic  [ 8 posts ] 
Author Message
 Post subject: Verslaser NEW PLS and VLS series drivers
PostPosted: Wed 27 Jun , 2007 9:49 am 
Offline
Site Admin
User avatar

Joined: Fri 10 Feb , 2006 12:40 pm
Posts: 3573
Location: Sunny Brighouse Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
The latest driver as of 27th June 2007 is:
http://www.denfordata.com/downloads/Uls2007-2.13.17.zip

Please check here, though in case it has been updated since (quite likely)
http://www.website.denford.ltd.uk/suppo ... -downloads


Top
 Profile  
 
 Post subject:
PostPosted: Wed 07 Jan , 2009 9:42 am 
Offline
Site Admin
User avatar

Joined: Fri 10 Feb , 2006 12:40 pm
Posts: 3573
Location: Sunny Brighouse Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
The latest drivers for VLS and PLS as of 6th Jan 2009 is here:
http://www.denfordata.com/downloads/5_24_38.zip

Quote:
We are pleased to announce the General Availability for Software v5.24.38 for the VersaLASER, Professional Laser and Industrial Laser Series.

The new software is designed to work across platforms – One software for three product lines!
VersaLASER® VLS2.30, VLS3.50, VLS3.60, VLS4.60 and VLS6.60
Professional Laser Series PLS3.75, PLS4.75, PLS6.75 and PLS6.150D
Industrial Laser Series ILS9.75, ILS9.150D, ILS12.75 and 12.150D

ULS software version 5.24.38 is not backwards compatible with legacy systems, such as M, V, X, XL, VL-200, VL-300, etc.
ULS does not plan on producing a backwards compatible version of the new software.

Please see attached release notes for software changes and feature


Attachments:
File comment: The 5.24.38 software release notes
Software-Release-Notes-v5_24_38 122208_v1.0.pdf [86.53 KiB]
Downloaded 1273 times
Top
 Profile  
 
 Post subject:
PostPosted: Fri 16 Jan , 2009 10:24 am 
Offline
CNC Guru
CNC Guru
User avatar

Joined: Tue 21 Feb , 2006 16:15 pm
Posts: 1198
Location: Denford UK
I had some problems installing 5.24.38 on my laptop.

General rules when installing this driver.

ENSURE ALL OLDER DRIVER INSTALLATIONS ARE REMOVED FIRST!

ENSURE THE LAPTOP HAS THE POWER SUPPLY CONNECTED.

I COULD NOT GET THE USB DRIVER TO INSTALL CORRECTLY WHEN THE LAPTOP WAS ON BATTERY POWER.


Top
 Profile  
 
 Post subject: another problem vith 5.24.38 on 3.50/Win XP SP2
PostPosted: Sun 01 Feb , 2009 12:00 pm 
Offline

Joined: Mon 04 Jun , 2007 15:09 pm
Posts: 11
Location: Iasi - Romania
Steve wrote:
I had some problems installing 5.24.38 on my laptop.

General rules when installing this driver.

ENSURE ALL OLDER DRIVER INSTALLATIONS ARE REMOVED FIRST!

ENSURE THE LAPTOP HAS THE POWER SUPPLY CONNECTED.

I COULD NOT GET THE USB DRIVER TO INSTALL CORRECTLY WHEN THE LAPTOP WAS ON BATTERY POWER.


Answer: uninstall old drivers and UCP -> restart PC -> install 5.24.38 (with power suply connected). :)

Probabily this is not final solutions: I make this steps (on desktop - not laptop) but I have other problem: "Installation Error version. Please re-install the UCP application and firmware."
Please help!


Last edited by npala on Sun 01 Feb , 2009 12:01 pm, edited 1 time in total.

Top
 Profile  
 
 Post subject:
PostPosted: Tue 03 Feb , 2009 6:17 am 
Offline
CNC Guru
CNC Guru
User avatar

Joined: Tue 21 Feb , 2006 16:15 pm
Posts: 1198
Location: Denford UK
Hi,

I had this message also. (even though the lasers still seemed to work afterwards).

I Uninstalled and reinstalled rebooting as requested and it seemed to fix the problem.

ULS are looking at the install routine. There may be another version.

Did you unplug the USB before making the install?

If not try disconnecting then install the software. Then plug the usb into the usb ports on the PC. Plug into each port in turn and the driver will install on all of them.

You may then need to uninstall and reinstall again.


In most cases the software installs perfectly. I know of about a dozen installations with no problems.

What operating system are you using?


Top
 Profile  
 
 Post subject:
PostPosted: Tue 03 Feb , 2009 11:57 am 
Offline
Site Admin
User avatar

Joined: Fri 10 Feb , 2006 12:40 pm
Posts: 3573
Location: Sunny Brighouse Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Quote:
another problem vith 5.24.38 on 3.50/Win XP SP2


Top
 Profile  
 
 Post subject: Thanks Steve
PostPosted: Mon 09 Feb , 2009 8:39 am 
Offline

Joined: Mon 04 Jun , 2007 15:09 pm
Posts: 11
Location: Iasi - Romania
Steve wrote:
Hi,

I had this message also. (even though the lasers still seemed to work afterwards).

I Uninstalled and reinstalled rebooting as requested and it seemed to fix the problem.

ULS are looking at the install routine. There may be another version.

Did you unplug the USB before making the install?

If not try disconnecting then install the software. Then plug the usb into the usb ports on the PC. Plug into each port in turn and the driver will install on all of them.

You may then need to uninstall and reinstall again.


In most cases the software installs perfectly. I know of about a dozen installations with no problems.

What operating system are you using?


Thanks Steve,

I uninstall -> unplug USB -> reboot -> install -> reboot -> plug USB, and now is ok. (Windos XP SP2).
I observe some delay to all command, on this version - is normal?

I hope this version resolve my old problem with rotary/CORA: turn circle in oval if I print vector (with blue).


Top
 Profile  
 
 Post subject: temporat work
PostPosted: Mon 16 Feb , 2009 8:40 am 
Offline

Joined: Mon 04 Jun , 2007 15:09 pm
Posts: 11
Location: Iasi - Romania
work only 1 day. After restart, I receive a print error from CorelDraw.
I reinstall 2.18.30 :(

_________________
www.gravez.ro & www.fotogravura.ro


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 8 posts ] 

All times are UTC [ DST ]


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Template made by DEVPPL
[ Time : 0.387s | 15 Queries | GZIP : Off ]
 
Loading