Maintenance

All info relating to the Denford Turn270 and NewTurn270 CNC lathes

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
dixonsca
CNC Apprentice
CNC Apprentice
Posts: 69
Joined: Tue 19 Sep , 2006 17:04 pm
Hardware/Software: Denford Magnum router. (now upgraded to a 3d router using retrofit kit macmotion controller and upgraded stepper motors)
Triac PC
Nova mill
Microrouter
Turn 270 Pro
Unimatic 4th axis
Makerbot Replicator 2
VR Milling 5
techsoft 2d design
corel draw
solidworks
artcam
lathecam designer
quickturn 2d
Location: Bradford
Contact:

Maintenance

Post by dixonsca » Wed 08 Jan , 2014 11:02 am

Does the 270 need lubrication i cant find any grease nipples and is there a maintenance or service manual available for download?
Thanks in advance
Graeme
Last edited by dixonsca on Wed 08 Jan , 2014 21:57 pm, edited 1 time in total.

Martin
CNC Guru
CNC Guru
Posts: 1897
Joined: Fri 24 Feb , 2006 17:09 pm
Location: Brighouse

Re: Maintenance

Post by Martin » Wed 08 Jan , 2014 18:26 pm

You need to remove the covers to gain access.

The Turn270 manual which is on the VRTurning CD explains the procedure.
Attachments
Turn 270 Operator Manual.pdf
(2.73 MiB) Downloaded 12717 times

Post Reply