All info relating to the Denford Triac series of CNC milling machines

Moderators: Martin, bradders, Steve, Mr Magoo

Post Reply
Posts: 11
Joined: Tue 28 Aug , 2018 15:50 pm
Hardware/Software: Denford Triac
Quick Cam Pro
Vr Milling


Post by jeremydraper » Sun 23 Jun , 2019 19:47 pm

How accurate is my Denford Triac ?

I would like to fit a high speed spindle so I can do engraving.

I have been asked what accuracy can I hold on my machiner but I am unsure what to reply.

User avatar
CNC Guru
CNC Guru
Posts: 1321
Joined: Tue 21 Feb , 2006 16:15 pm
Location: Denford UK

Re: accuracy

Post by Steve » Sat 29 Jun , 2019 7:27 am

Resolution will be down to 0.01m

The accuracy is difficult to quantify as this is a potential worse case scenario depending on the tolerances os all the parts.

Repeatability should be within 0.05

Post Reply