vrmilling and denford triac

All info relating to the Denford Triac series of CNC milling machines

Moderators: Martin, Steve, Mr Magoo

Post Reply
jeremydraper
Posts: 11
Joined: Tue 28 Aug , 2018 15:50 pm
Hardware/Software: Denford Triac
Quick Cam Pro
Vr Milling

vrmilling and denford triac

Post by jeremydraper » Thu 20 Sep , 2018 8:32 am

Hi,
When I run my Denford Triac from vrmilling it does not apply the tooling data diameter to the programme, I have entered in tool position 1 the diameter 10 mm but when I change that 10mm to change hole size nothing happens.

Post Reply