Hi folks,
I require a bit more help. I have swapped out the eprom on my triac vmc but I only get a .L flashing on the eurocard. Not sure if this is an issue with the eprom or not. The other two boards I have don't have v2.1 eprom, they are green segment boards. Would the eprom from one of those work or is there a way to tell what is going wrong?
2.1 Eprom giving me .L
Moderators: Martin, Steve, Mr Magoo
Re: 2.1 Eprom giving me .L
anyone?
-
- CNC Guru
- Posts: 613
- Joined: Tue 29 Apr , 2014 18:38 pm
- Hardware/Software: Starturn 5 (sort of running, I will get this done!)
Lathe cam designer V1.11
Quickturn 2D Design
FANUC offline and online programs.
Microrouter Pro NS V5 (microstep)
VR2 and VR5
Boxford VMC260
Techsoft 2d Design tools V1 > V2
ProDesktop
Fusion 360
Deskproto
Re: 2.1 Eprom giving me .L
Denford only come on here in their spare time, it's not part of 'the job' as I understand it, so sometimes you have to go put the kettle on and sit down and think of other things until they get chance.
Pete
Pete
Re: 2.1 Eprom giving me .L
The Eproms on the NextStep cards are different. Are either of them rack mounted cards?
Re: 2.1 Eprom giving me .L
damn, they are both surface mounted top cards. As was the one i had with the 2.1 eprom but that had a red segment board.