No gib locking screw? Triac

All info relating to the Denford Triac series of CNC milling machines

Moderators: Martin, bradders, Steve, Mr Magoo

Post Reply
2strokestuffing
Posts: 1
Joined: Wed 18 Nov , 2020 23:14 pm

No gib locking screw? Triac

Post by 2strokestuffing » Wed 18 Nov , 2020 23:29 pm

I recently bought a Triac.
Reading through the documentation I can find, it seems like it should have an adjustment screw and a locking screw at the opposite end for each gib. Mine has just the adjustment screw(on X&Y, haven't checked Z yet)
There's no holes for locking screws in the castings.

Is there a locking mechanism located elsewhere on some triacs?
My problem is,not being able to lock the gib, it will work fine in one direction, but slide and bind the axis in the opposite direction.(unless I have it really loose)


Thanks
Alex

Post Reply