Manual for 80s green r8 triac

All info relating to the Denford Triac series of CNC milling machines

Moderators: Martin, bradders, Steve, Mr Magoo

Post Reply
jonnydeen
CNC Apprentice
CNC Apprentice
Posts: 35
Joined: Tue 09 Jul , 2013 20:45 pm
Hardware/Software: 1996 Novamill, VR milling 2.3

Manual for 80s green r8 triac

Post by jonnydeen » Mon 14 Sep , 2020 15:51 pm

As the title says, does anyone have a manual to suit the earlier green triac with r8 spindle?
Tia

Martin
CNC Guru
CNC Guru
Posts: 1729
Joined: Fri 24 Feb , 2006 17:09 pm
Location: Brighouse

Re: Manual for 80s green r8 triac

Post by Martin » Tue 15 Sep , 2020 12:44 pm


jonnydeen
CNC Apprentice
CNC Apprentice
Posts: 35
Joined: Tue 09 Jul , 2013 20:45 pm
Hardware/Software: 1996 Novamill, VR milling 2.3

Re: Manual for 80s green r8 triac

Post by jonnydeen » Wed 16 Sep , 2020 13:21 pm

Cheers martin, wasnt sure of the control name. Going to be receiving one in the next few days and wanted to know what I was getting myself into.
Is the spindle really only capable of 2500rpm? Would have thought It would be fit for more

Post Reply