Starturn 8 documentation

All info relating to the Denford StarTurn CNC lathes

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
Denford Admin
Site Admin
Posts: 3649
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:
Contact Denford Admin

Starturn 8 documentation

Post by Denford Admin » Fri 01 Jul , 2011 10:48 am

All the info documentation and schematics that came with a 1988 Starturn8

Starturn8-electrical-schematic.pdf
Starturn8-electrical-schematic.pdf
(261.97 KiB) Downloaded 1646 times
Starturn8-Parts-List.pdf
Starturn8-Parts-List.pdf
(415.65 KiB) Downloaded 1935 times
Starturn-IBM-Software-Manual.pdf
Starturn-IBM-Software-Manual.pdf
(1.05 MiB) Downloaded 1271 times
CAM-Designer-Software-Manual.pdf
CAM-Designer-Software-Manual.pdf
(1006.8 KiB) Downloaded 1192 times
Starturn-8-Parts-Manual.pdf
Starturn-8-Parts-Manual.pdf
(681.05 KiB) Downloaded 4598 times
STARTURN-PROGRAMMING-OPERATIONS-MANUAL.pdf
STARTURN-PROGRAMMING-OPERATIONS-MANUAL.pdf
(1.09 MiB) Downloaded 1961 times
Starturn-Programming-Examples.pdf
Starturn-Programming-Examples.pdf
(267.22 KiB) Downloaded 1014 times
Top
User avatar
Denford Admin
Site Admin
Posts: 3649
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:
Contact Denford Admin

Re: Starturn 8 documentation

Post by Denford Admin » Fri 01 Jul , 2011 10:53 am

This 1988 machine had Parker SD3 drives, GSM control an SEM DC servo spindle motor and JAY Electronics spindle drive.

(If anyone has any info on the spindle drive I'd appreciate it)
Top
Post Reply

Return to “StarTurn”