Price, ball park figure?

All info relating to the Denford Starmill CNC milling machines

Moderators: Martin, Steve, Mr Magoo

Post Reply
timber
Posts: 27
Joined: Tue 22 Dec , 2009 9:55 am

Price, ball park figure?

Post by timber » Sun 17 Apr , 2011 20:15 pm

This post is of an identical machine I am looking at.

Comes with computer, floppy discs, power supply, red bench, the whole thing, leads and all.

Is not up and running, but I can't see why it won't go once leads are in and fired up.

What is a ball park figure for the price of one of these machines (looks like it has never been used)

Thanks in advance

timber
Posts: 27
Joined: Tue 22 Dec , 2009 9:55 am

Re: Price, ball park figure?

Post by timber » Mon 18 Apr , 2011 11:21 am


User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Re: Price, ball park figure?

Post by Denford Admin » Tue 19 Apr , 2011 9:14 am

Schools have been known ask £200 or even give them away.
However, you'd have to be lucky to get one for that - I'd say they're worth between £400-£1000 (paying more if it can be shown working and has CAM software or extra tooling)

timber
Posts: 27
Joined: Tue 22 Dec , 2009 9:55 am

Re: Price, ball park figure?

Post by timber » Tue 19 Apr , 2011 16:59 pm

Thanks for that.
Cheers

Post Reply