machining a large model

All info relating to the Denford Router 2600 and Pro CNC routers

Moderators: Martin, Steve, Mr Magoo

Post Reply
pdickinson
Posts: 2
Joined: Thu 31 Jan , 2019 9:51 am

machining a large model

Post by pdickinson » Thu 31 Jan , 2019 9:58 am

Morning All,

I am currently using the 2600 PRO to manufacture some sixth form projects, but I am having a problem with the amount of waste material produced during the process. Is there a way of stopping the machine mid cycle so that I can remove the waste and then resume it? I am sure our old technician had a way of doing this, but the knowledge went with him...

Thanks

Martin
CNC Guru
CNC Guru
Posts: 1897
Joined: Fri 24 Feb , 2006 17:09 pm
Location: Brighouse

Re: machining a large model

Post by Martin » Fri 01 Feb , 2019 9:53 am

You can stop the program at any point & then use specify a start block using the icon on the bottom left.

The icon has a picture of a magnifying glass in it & the line you stopped at should be present.

pdickinson
Posts: 2
Joined: Thu 31 Jan , 2019 9:51 am

Re: machining a large model

Post by pdickinson » Fri 01 Feb , 2019 13:41 pm

:lolol:

Thank you! worked perfectly!

Post Reply