2600 Not turning on

All info relating to the Denford Router 2600 and Pro CNC routers

Moderators: Martin, Steve, Mr Magoo

Post Reply
RyanBall
Posts: 10
Joined: Wed 18 May , 2016 8:03 am
Hardware/Software: Router 2600

2600 Not turning on

Post by RyanBall » Thu 18 May , 2017 3:46 am

We have not used the CNC Router for a few weeks and went to turn it on today to cut some cars for our upcoming F1 competition and it will not turn on.
The power light is lighting up but no lights in the machine and the door won't release. The emergency stop button is released. I have tried a new power cable and USB lead

Thanks in advance,
Ryan

Martin
CNC Guru
CNC Guru
Posts: 1897
Joined: Fri 24 Feb , 2006 17:09 pm
Location: Brighouse

Re: 2600 Not turning on

Post by Martin » Thu 18 May , 2017 10:41 am

Can you check the fuse in the drawer under the kettle plug socket on the side & the fuses on the relay board (Orange plugs) in the end panel.

RyanBall
Posts: 10
Joined: Wed 18 May , 2016 8:03 am
Hardware/Software: Router 2600

Re: 2600 Not turning on

Post by RyanBall » Fri 19 May , 2017 0:51 am

Sorted - thanks. Fuse in the orange board.
Maybe that lightning strike we had!?

Post Reply