How to assemble an ER20 collet to the Collet Nut

All info relating to the Denford Router 2600 and Pro CNC routers

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
Steve
CNC Guru
CNC Guru
Posts: 1430
Joined: Tue 21 Feb , 2006 16:15 pm
Location: Denford UK

How to assemble an ER20 collet to the Collet Nut

Post by Steve » Wed 22 Dec , 2010 12:03 pm

On the pro Range of spindle motors there is and ER20 collet chuck fitted.

The collet must be assembled to the nut before it is inserted into the spindle nose otherwise it will not grip correctly and the tool will not release as the collet is released.

Attached is a short movie showing how to attach collets to the nut.
Attachments
ER20 collet assembly.zip
(5.21 MiB) Downloaded 636 times

User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Re: How to assemble an ER20 collet to the Collet Nut

Post by Denford Admin » Tue 04 Jan , 2011 11:46 am

Or watch it here on youtube:
http://www.youtube.com/watch?v=W3-P0bN_PBo

Post Reply