Orac ATC turret, 19mm round tool holders

All info relating to the Denford ORAC CNC lathes

Moderators: Martin, Steve, Mr Magoo

Post Reply
vandal968
Posts: 20
Joined: Wed 08 Dec , 2010 11:21 am
Hardware/Software: EasiMill 3; Orac

Orac ATC turret, 19mm round tool holders

Post by vandal968 » Tue 28 Feb , 2012 17:12 pm

I just got my Orac turret working properly under Mach3. I need a set of bushings to load into the (4) 19mm holes in the ATC turret to hold drills, endmills, etc. Since I've got to make them anyway, I'd prefer to have them match the style of the factory parts as closely as possible. Does anyone have drawings, or pictures or measurements of the factory parts?

thanks,
v
Last edited by vandal968 on Mon 12 Mar , 2012 18:45 pm, edited 1 time in total.
Top
User avatar
Denford Admin
Site Admin
Posts: 3635
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:
Contact Denford Admin

Re: Orac ATC turret, 19mm round tool holders

Post by Denford Admin » Tue 28 Feb , 2012 18:01 pm

This might be it :
/viewtopic.php?f=42&t=3299
Top
vandal968
Posts: 20
Joined: Wed 08 Dec , 2010 11:21 am
Hardware/Software: EasiMill 3; Orac

Re: Orac ATC turret, 19mm round tool holders

Post by vandal968 » Wed 29 Feb , 2012 6:55 am

Perfect! Exactly what I was looking for.

Thank you,
v
Top
Post Reply

Return to “Orac”