novaturn atc random tool selection... fixed!!

All info relating to the Denford NovaTurn CNC lathes

Moderators: Martin, Steve, Mr Magoo

Post Reply
bpmsl
CNC Expert
CNC Expert
Posts: 145
Joined: Mon 16 Nov , 2009 10:00 am

novaturn atc random tool selection... fixed!!

Post by bpmsl » Tue 28 Jun , 2011 23:41 pm

OK just a short post to help anyone else who has had issues with the atc not moving to the correct tool number.

Having removed the ATC and investigated the end furthest from the tool holder it appears that position is detected by optical pickups reflecting of metalic and matt black tracks on a rotating disk. On my machine these were corroded / had paint flaking off.

The fix was simple, bits of tin foil glued over the corrosion on the shiny bits and black marker pen where the matt black paint has flaked off.

Be careful to ensure the fences between the optical pickups arent bent over in the process and re-assemble. Works a treat now...

:-)

Cheers
BPM

Post Reply