DXF Import Error

All info relating to the Denford Novamill CNC Milling machines

Moderators: Martin, bradders, Steve, Mr Magoo

Post Reply
oyoung
CNC Apprentice
CNC Apprentice
Posts: 41
Joined: Fri 18 Jul , 2008 14:13 pm
Hardware/Software: Quickcam Pro v1.13.0.76
VR Milling v5.63.0.680
Novamill
Microrouter Pro
Win 7 Pro

DXF Import Error

Post by oyoung » Mon 16 May , 2016 15:14 pm

Hi-

I am trying to open a dxf file with VR Milling, but keep getting an "Access Violation at address 064AE7FE (or similar number) in module 'VECAD.dll'"

I have tried it on two different computers with similar results. I am running Win 7, with a new install of the latest VR Milling.

Thanks

Martin
CNC Guru
CNC Guru
Posts: 1701
Joined: Fri 24 Feb , 2006 17:09 pm
Location: Brighouse

Re: DXF Import Error

Post by Martin » Tue 17 May , 2016 16:33 pm


oyoung
CNC Apprentice
CNC Apprentice
Posts: 41
Joined: Fri 18 Jul , 2008 14:13 pm
Hardware/Software: Quickcam Pro v1.13.0.76
VR Milling v5.63.0.680
Novamill
Microrouter Pro
Win 7 Pro

Re: DXF Import Error

Post by oyoung » Tue 17 May , 2016 17:35 pm

No - but it is the same as this! viewtopic.php?f=2&t=5116

Thanks for your attention.

Post Reply