Novamill Part names

All info relating to the Denford Novamill CNC Milling machines

Moderators: Martin, Steve, Mr Magoo

Post Reply
oyoung
CNC Apprentice
CNC Apprentice
Posts: 45
Joined: Fri 18 Jul , 2008 14:13 pm
Hardware/Software: Quickcam Pro v1.13.0.76
VR Milling v5.63.0.680
Novamill
Microrouter Pro
Win 7 Pro

Novamill Part names

Post by oyoung » Wed 30 May , 2012 14:57 pm

Hi Can someone please clarify which part is the 'Headstock' and which part is the 'Axis Bearings'?

I am trying to maintain/lubricate the thing. Is 'Headstock' the main spindle? Presumably the spindle and the spindle motor have bearings that will both need renewing after several miles of wear?

Are the 'Axis Bearings' the X,Y and Z motor bearings?

When the spindle spins it makes a bit of a grinding noise. I guess it's new bearing time...

Thanks :)

User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Re: Novamill Part names

Post by Denford Admin » Wed 30 May , 2012 15:14 pm

To me, headstock is usually the bit that turns the chuck on a lathe...normally Headstock on the left, Tailstock on the right.
On a mill, the "headstock" would equate to what I know as the spindle (the bit that spins the tools)

Axis bearings will mean the axis leadscrew end-bearings. An axis "nut" is the thing that goes around the leadscrew to move the axis...it will contain small ball bearings that usually need some lubricating.

Novamill Milling Spindle Head Arrangement Drawings
viewtopic.php?t=1785

Denford Starmill(Novamill) Spindle Bearing
viewtopic.php?f=45&t=712

oyoung
CNC Apprentice
CNC Apprentice
Posts: 45
Joined: Fri 18 Jul , 2008 14:13 pm
Hardware/Software: Quickcam Pro v1.13.0.76
VR Milling v5.63.0.680
Novamill
Microrouter Pro
Win 7 Pro

Re: Novamill Part names

Post by oyoung » Wed 30 May , 2012 22:45 pm

I took the thing apart and it seemed, according to this download/file.php?id=766 that part RM1/715A has become slightly bent at the top and rotates with a slight wobble, if that's the technical term. It fouls on part RM7/105 and that's what is growling. I gave it a seeing to with a file and it's fine now.

Thanks very much :D

PS: Correct file link now added :oops: :lol:
Last edited by oyoung on Thu 31 May , 2012 14:52 pm, edited 3 times in total.

User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Re: Novamill Part names

Post by Denford Admin » Thu 31 May , 2012 8:47 am

Glad it's fixed :)
It fouls on part RM7/105
For anyone else looking, is RM7/105 the tin lid ? I can't see it on that drawing..

Post Reply