Hi!, how can I get this drivers?

All info relating to the Denford Mirac lathes

Moderators: Martin, Steve, Mr Magoo

Post Reply
Monseis1
Posts: 1
Joined: Fri 04 Nov , 2016 0:14 am

Hi!, how can I get this drivers?

Post by Monseis1 » Fri 04 Nov , 2016 0:25 am

As the title says, how can I get this drivers? the monitor in the machine doesn't work so I need to use the PC.


Screenshots:

Machine: http://prntscr.com/d2sw6u
Model: http://prntscr.com/d2swmp
Error: http://prntscr.com/d2sx5b

To use the machine (before the error) we use this program and it worked, but now I don't know how to get that drivers
http://website.denford.ltd.uk/support/9 ... s-software (Mirac)
The Drivers inside of DRIVERS and DRIVERS2 in the denford page doesn't work, so I hope find a solution :D


Thank you for your attention! (and sorry for my bad english)

Martin
CNC Guru
CNC Guru
Posts: 1897
Joined: Fri 24 Feb , 2006 17:09 pm
Location: Brighouse

Re: Hi!, how can I get this drivers?

Post by Martin » Fri 04 Nov , 2016 8:02 am

Have you checked the control card in the electrical cabinet. I presume you will have a GSM LCB3 board fitted with it being a 1991 build. Just check it is powered up. In order to connect you need to have the correct Mirac.go file for the machine & connected via a RS 232 cable to the control card. Has any of this been changed?

Post Reply