6 station Barufaldi Turret -rotary Switch

All info relating to the Denford Mirac lathes

Moderators: Martin, Steve, Mr Magoo

Post Reply
pete S
Posts: 13
Joined: Tue 04 Sep , 2007 12:27 pm
Location: Michigan,USA

6 station Barufaldi Turret -rotary Switch

Post by pete S » Thu 16 Jul , 2009 15:32 pm

Hi,

Does anyone know the part number of the rotary switch used in the 6 Station Barufaldi Turret, circa 1989 Mirac?

Have had problems with the Barufaldi 6 station Turret. The rotary switch in the backend of turret is disintegrating, I have repaired it a few times-but I really need a new one. If anyone knows where to get it, a part number or a suitable replacement, the info would be greatly appreciated.

Thanks
Pete

User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Re: 6 station Barufaldi Turret -rotary Switch

Post by Denford Admin » Fri 17 Jul , 2009 9:03 am

Got this price list from 1990 - the UK agents are still going - maybe there is one in the USA?
Their website: http://www.beswww.com/
Attachments
BaruffaldiRH80TurretSpares-1990.pdf
(197.89 KiB) Downloaded 1302 times

pete S
Posts: 13
Joined: Tue 04 Sep , 2007 12:27 pm
Location: Michigan,USA

Re: 6 station Barufaldi Turret -rotary Switch

Post by pete S » Sat 08 Aug , 2009 21:47 pm

Hi,

Thanks for the reply it is greatly appreciated. Just now looking into your reply
so I don't have any info to report back to the forum at the moment.
I at least have a place to start now-Thanks
Pete
Thanks
Pete

Post Reply