Page 1 of 1
Johnford s40 cnc Fanuc OM-C parameters
Posted: Sun 13 Jan , 2019 18:08 pm
by quick_cnc
hi, i need help regarding the machine Johnford s40 cnc Fanuc OM-C parameters are Lost from getting ram parity 911 alarm. batteries are died after i changed the batteries with reset + cancel + del button sytem is on but bad luck no backup
so if anybody have the same machine parameters please mail me
rd181993@gmail.com.
i am very thankful too you guys. please help.
Re: Johnford s40 cnc Fanuc OM-C parameters
Posted: Mon 14 Jan , 2019 11:49 am
by Martin
Is this a Denford machine?
What serial number is it?
Can you post a picture.
Re: Johnford s40 cnc Fanuc OM-C parameters
Posted: Tue 15 Jan , 2019 17:16 pm
by quick_cnc
sorry not its not DENFORD machine is johnford cnc s40
Re: Johnford s40 cnc Fanuc OM-C parameters
Posted: Tue 15 Jan , 2019 17:17 pm
by quick_cnc
will you help in any way for parameters??? very thankful too if you can do help.
Re: Johnford s40 cnc Fanuc OM-C parameters
Posted: Thu 17 Jan , 2019 4:33 am
by quick_cnc
only cycle is not starting parameters are up now any help???
Re: Johnford s40 cnc Fanuc OM-C parameters
Posted: Thu 17 Jan , 2019 11:08 am
by Martin
We only have parameters for Denford machines.
Re: Johnford s40 cnc Fanuc OM-C parameters
Posted: Sun 20 Jan , 2019 19:10 pm
by quick_cnc
okay not problem dear,if you know how i diagnose the auto cycle start fault please help me.is their any parameters for cycle start function to activate or deactivate???