Customer asks..................
What software will the MINT CHIP 3.28 v1.6c/S-JD3 run
What software will the MINT CHIP 3.28 v1.6c/S-JD3 run
Moderators: Martin, Steve, Mr Magoo
- bradders
- CNC Guru
- Posts: 1251
- Joined: Mon 13 Feb , 2006 12:35 pm
- Location: Brighouse, England
- Contact:
Re: What software will the MINT CHIP 3.28 v1.6c/S-JD3 run
It runs the now unsupported Denford DOS software