BT35 and BT40 Tool holder information brochure

General support, help and advice for Denford CNC machines (old and new)

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

BT35 and BT40 Tool holder information brochure

Post by Denford Admin » Fri 16 Jul , 2010 15:44 pm

bt35.jpg
bt35.jpg (60.32 KiB) Viewed 9797 times
BT35 and BT40 tool holding information.pdf
(1.07 MiB) Downloaded 1695 times

User avatar
bradders
CNC Guru
CNC Guru
Posts: 1251
Joined: Mon 13 Feb , 2006 12:35 pm
Location: Brighouse, England
Contact:

Re: BT35 and BT40 Tool holder information brochure

Post by bradders » Tue 26 Jul , 2011 12:17 pm

BT 30 - 1-1\4" (31.75) across bore in spindle
BT 35 - 1-1\2" (38.10) across bore in spindle

Post Reply