NC Service hand book for Heidenhain TNC426/430

General support, help and advice for Denford CNC machines (old and new)

Moderators: Martin, Steve, Mr Magoo

Post Reply
greenery
Posts: 9
Joined: Thu 21 Aug , 2008 9:31 am

NC Service hand book for Heidenhain TNC426/430

Post by greenery » Sat 14 Nov , 2009 14:35 pm

Now I already download NC Service handbook for TNC426/230 but zip file had password could anybody help me.

Regards

User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Re: NC Service hand book for Heidenhain TNC426/430

Post by Denford Admin » Wed 18 Nov , 2009 11:36 am

Hi - where did you download it or get the link from ?
Go back to that site - there is normally some info there telling you the zip file password

greenery
Posts: 9
Joined: Thu 21 Aug , 2008 9:31 am

Re: NC Service hand book for Heidenhain TNC426/430

Post by greenery » Wed 18 Nov , 2009 11:49 am

Hello Sir

I down load from Heidenhain website

http://www.heidenhain.de/filebase/

User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Re: NC Service hand book for Heidenhain TNC426/430

Post by Denford Admin » Wed 18 Nov , 2009 15:27 pm

Ok, after a bit of research it seems you need to contact your local Heidenhain service agent for the password to unlock the zip files.

greenery
Posts: 9
Joined: Thu 21 Aug , 2008 9:31 am

Re: NC Service hand book for Heidenhain TNC426/430

Post by greenery » Thu 19 Nov , 2009 9:02 am

Thanks you very much

Post Reply