Denford's - M/C problem - what Info should I supply ?
Moderators: Martin, Steve, Mr Magoo
- bradders
- CNC Guru
- Posts: 1251
- Joined: Mon 13 Feb , 2006 12:35 pm
- Location: Brighouse, England
- Contact:
Denford's - M/C problem - what Info should I supply ?
When contacting Denford's with a problem on a machine what info should I supply in the first instance ?
- bradders
- CNC Guru
- Posts: 1251
- Joined: Mon 13 Feb , 2006 12:35 pm
- Location: Brighouse, England
- Contact:
Re: w
The information below is a good start
1. Machine Name (Triac, Router 2600 Pro, Turn 270 etc):
2. Serial No of the Machine:
3. Year of Manufacture:
4. Communications type ? USB / RS232 :
5. Colour of 7 segment display on Baldor board? Red / Green / Orange:
6. Colour of Plugs and Sockets on the periphery of the Baldor board? Orange / Black:
1. Machine Name (Triac, Router 2600 Pro, Turn 270 etc):
2. Serial No of the Machine:
3. Year of Manufacture:
4. Communications type ? USB / RS232 :
5. Colour of 7 segment display on Baldor board? Red / Green / Orange:
6. Colour of Plugs and Sockets on the periphery of the Baldor board? Orange / Black: