Microrouter Compact error: parameters beyond limits

All info relating to the Denford MicroRouter Compact small routing machines

Moderators: Martin, Steve, Mr Magoo

Post Reply
Benny
CNC Expert
CNC Expert
Posts: 201
Joined: Fri 20 Oct , 2006 15:27 pm
Location: USA

Microrouter Compact error: parameters beyond limits

Post by Benny » Thu 01 Mar , 2007 18:43 pm

Customer writes in ...

Description of problem: When creating F1 car the first side mills fine and then when we get to code for mirroring or we are ready to mill the other side the machine freezes & presents machine error: parameters beyond limits

Can cut right hand side
Freezes machine error: beyond limits

MRC July 2004
Nextmove - RS232
QC 3D v. 3
VR Milling 2.31
ProDesktop
Windows XP

User avatar
Steve
CNC Guru
CNC Guru
Posts: 1432
Joined: Tue 21 Feb , 2006 16:15 pm
Location: Denford UK

Post by Steve » Fri 02 Mar , 2007 9:06 am

If the machine is saying there is a move out of the machine limits this is what the problem is.

Is the fixture located in the center of the bed?

Is the datum position the centre of the car in the Y axis?

Are you using the same datum for both sides of the car?

Have you mirrored the correct axis?

User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Post by Denford Admin » Fri 02 Mar , 2007 17:05 pm

Steves questions are all valid, and need thinking about...

If you have set the front corner of the car as your datum, then Mirroring in Y will require you to shift the Y datum to the back corner of the car, etc..

Post Reply