Microrouter Compacts X axis is stalling at full speed

All info relating to the Denford MicroRouter Compact small routing machines

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
bradders
CNC Guru
CNC Guru
Posts: 1251
Joined: Mon 13 Feb , 2006 12:35 pm
Location: Brighouse, England
Contact:

Microrouter Compacts X axis is stalling at full speed

Post by bradders » Thu 08 Feb , 2007 15:44 pm

My Microrouter Compacts X axis is stalling when I run is at full speed
Last edited by bradders on Thu 08 Feb , 2007 15:48 pm, edited 2 times in total.

User avatar
bradders
CNC Guru
CNC Guru
Posts: 1251
Joined: Mon 13 Feb , 2006 12:35 pm
Location: Brighouse, England
Contact:

Post by bradders » Thu 08 Feb , 2007 15:46 pm

This problem is probably down to poor "House Keeping". Remove the X axis cover and give the lead screw a good clean and a spray with a dry silicon lubricant

Post Reply