No movement in the Z axis

All info relating to the Denford MicroRouter Compact small routing machines

Moderators: Martin, Steve, Mr Magoo

User avatar
Steve
CNC Guru
CNC Guru
Posts: 1432
Joined: Tue 21 Feb , 2006 16:15 pm
Location: Denford UK

Re: No movement in the Z axis

Post by Steve » Fri 15 Jan , 2010 9:33 am

Customer reports:

found the problem… found a black wire that was soldered to a brown wire. He re-soldered them, jogged it around an ran a simple test program. Seems to be working OK. He is putting it back together now.


It seems one of the BLOB joints was not very good! :lolol:

Post Reply