Porter Cable Router Playing Up

All info relating to the Denford MicroRouter Compact small routing machines

Moderators: Martin, Steve, Mr Magoo

Post Reply
AliveOak
Posts: 25
Joined: Fri 29 Aug , 2014 10:57 am
Hardware/Software: MicroRouter Compact (SN:H04459/1)
USB (VRMilling V5)
Fujitsu PC (Win 10, 64bit)

AND...

2600 Router
USB (VRMilling V5)
Zoostorm PC (Win 10, 64bit)

Porter Cable Router Playing Up

Post by AliveOak » Mon 04 Jul , 2016 17:06 pm

Hi. The PC router in my microrouter can't maintain its revs. It sounds like the power it is receiving is flickering. I have changed the brushes and blown it out with compressed air and no joy. If anyone has any ideas I would be very grateful. Cheers.

Martin
CNC Guru
CNC Guru
Posts: 1906
Joined: Fri 24 Feb , 2006 17:09 pm
Location: Brighouse

Re: Porter Cable Router Playing Up

Post by Martin » Tue 05 Jul , 2016 9:06 am

What router motor do you have?

AliveOak
Posts: 25
Joined: Fri 29 Aug , 2014 10:57 am
Hardware/Software: MicroRouter Compact (SN:H04459/1)
USB (VRMilling V5)
Fujitsu PC (Win 10, 64bit)

AND...

2600 Router
USB (VRMilling V5)
Zoostorm PC (Win 10, 64bit)

Re: Porter Cable Router Playing Up

Post by AliveOak » Tue 05 Jul , 2016 12:33 pm

Thanks for the reply. I've sorted it. My brain only works part-time. It was the brushes after all. I replaced the worn out one with the wrong ones. D'oh! :oops:

Martin
CNC Guru
CNC Guru
Posts: 1906
Joined: Fri 24 Feb , 2006 17:09 pm
Location: Brighouse

Re: Porter Cable Router Playing Up

Post by Martin » Wed 06 Jul , 2016 10:24 am

As long as you are up & running.

Post Reply