Z axis homing issue

All info relating to the Denford MicroRouter and MicroRouter Pro CNC Routers

Moderators: Martin, Steve, Mr Magoo

Post Reply
Large519
CNC Expert
CNC Expert
Posts: 101
Joined: Wed 20 Mar , 2013 22:34 pm
Hardware/Software: Denford Triac PNC3
FeatureCam - CADCAM
Delcam Powershape

Z axis homing issue

Post by Large519 » Mon 04 Aug , 2014 8:31 am

When homing my router pro in the z axis, it will reach the micro switch, reverse direction and just keep going, sometimes all the way to its max travel, without stopping at its normal return distance.. Any help would be greatly appreciated.

The microswitch seem ok, as the axis changes direction when it's activated...

Post Reply