PC 3102 HD Brushes in the UK in a rush

All info relating to the Denford MicroRouter and MicroRouter Pro CNC Routers

Moderators: Martin, Steve, Mr Magoo

Post Reply
cowpat
Posts: 13
Joined: Tue 20 Dec , 2011 17:56 pm

PC 3102 HD Brushes in the UK in a rush

Post by cowpat » Thu 22 Dec , 2011 15:11 pm

Hi
I've just got a second hand Microrouter, and 4 minutes into my first test job, the spindle motor starting arcing, then stopped. :-(
I've taken it apart and although one of the brushes is fine, the other one is at the minimum which would explain the behaviour.

So I need a new set of brushes for a Porter-Cable 3102 HD. I live in the UK, and I would like to get hold of some before Christmas if that's possible.
Anyone know of anywhere I could get them from?

User avatar
bradders
CNC Guru
CNC Guru
Posts: 1251
Joined: Mon 13 Feb , 2006 12:35 pm
Location: Brighouse, England
Contact:

Re: PC 3102 HD Brushes in the UK in a rush

Post by bradders » Thu 22 Dec , 2011 15:26 pm

Router Small motor spindle brushes Pt No BI02501AB
(Motor 3102) (Red Slide switch) £20.00 / Pr + £5.00 P&P + VAT

cowpat
Posts: 13
Joined: Tue 20 Dec , 2011 17:56 pm

Re: PC 3102 HD Brushes in the UK in a rush

Post by cowpat » Thu 22 Dec , 2011 15:28 pm

In case it's useful to any US users, or anyone prepared to wait 15-30 days for delivery, I believe that this(http://www.ereplacementparts.com/brush-p-60335.html) is the correct part.

Large519
CNC Expert
CNC Expert
Posts: 101
Joined: Wed 20 Mar , 2013 22:34 pm
Hardware/Software: Denford Triac PNC3
FeatureCam - CADCAM
Delcam Powershape

Re: PC 3102 HD Brushes in the UK in a rush

Post by Large519 » Mon 17 Mar , 2014 14:16 pm

Hi, where do I order the mentioned Brushes from,
bradders wrote:Router Small motor spindle brushes Pt No BI02501AB
(Motor 3102) (Red Slide switch) £20.00 / Pr + £5.00 P&P + VAT
Is that direct from Denford??

User avatar
bradders
CNC Guru
CNC Guru
Posts: 1251
Joined: Mon 13 Feb , 2006 12:35 pm
Location: Brighouse, England
Contact:

Re: PC 3102 HD Brushes in the UK in a rush

Post by bradders » Tue 18 Mar , 2014 13:29 pm

Prices now out of date, basically the 3102 motor is not in production.

https://isupply3d.com/denford-section/d ... uct_id=208

Post Reply