Where do I start...

All info relating to the Denford MicroRouter and MicroRouter Pro CNC Routers

Moderators: Martin, Steve, Mr Magoo

Post Reply
unravelled
Posts: 2
Joined: Mon 12 Sep , 2011 14:59 pm

Where do I start...

Post by unravelled » Mon 12 Sep , 2011 15:27 pm

I have volunteered to help a local school in getting a Microrouter v4 pro ns up and running. The machine was donated by another educational site which was closing. Serial no is H02679, of September 2002. As far as I can tell all they have is the machine, no software or manuals.
My immediate need is to get hold of manuals, so that I can find out what questions to ask next. A quick scan of this site didn't appear to show any for download, but I may have been looking for the wrong thing.

Thanks

Dave

(Brockley, SE London)

User avatar
bradders
CNC Guru
CNC Guru
Posts: 1251
Joined: Mon 13 Feb , 2006 12:35 pm
Location: Brighouse, England
Contact:

Re: Where do I start...

Post by bradders » Tue 13 Sep , 2011 7:12 am

Contact Denfords.
Tel 01484 728000

The Microrouter Pro was dispatched with VR Milling Ver 2 software, you need to be looking to purchase this software or alternatively upgrade to VR Milling Ver 5 with USB conectivity

unravelled
Posts: 2
Joined: Mon 12 Sep , 2011 14:59 pm

Re: Where do I start...

Post by unravelled » Wed 14 Sep , 2011 8:29 am

Thanks for the information. I've contacted Denford and got rough prices, now to see if the school can chase up the original software to save money.

thanks

Dave

Post Reply