Scantek 2000 scanturn and scanmill Information

All info relating to the Denford MicroMill and MicroTurn lathes and mills

Moderators: Martin, Steve, Mr Magoo

Post Reply
t28c34
Posts: 1
Joined: Sun 16 Jun , 2013 0:09 am

Scantek 2000 scanturn and scanmill Information

Post by t28c34 » Sun 16 Jun , 2013 1:40 am

Can someone tell me tom information about the machines i picked up at a auction? What software in need to download? Firmware? Will they run on Mach 3? All i have are the machines, a Scanturn manual and a quick start Scanmill manual.
Attachments
DSC_0074 a.jpg
DSC_0074 a.jpg (715.71 KiB) Viewed 8974 times
DSC_0073 a.jpg
DSC_0073 a.jpg (797.17 KiB) Viewed 8974 times
DSC_0072 a.jpg
DSC_0072 a.jpg (1.12 MiB) Viewed 8974 times
DSC_0071 a.jpg
DSC_0071 a.jpg (1.05 MiB) Viewed 8974 times

User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Re: Scantek 2000 scanturn and scanmill Information

Post by Denford Admin » Mon 17 Jun , 2013 9:06 am

It will have run from VR Milling version 2.
You can get it running fairly easily from a basic BOB and Mach if you don't want programmable spindle control
Some links
Baldor Nextstep Step and Direction pins - 96way connector
viewtopic.php?f=4&t=2264
Baldor eurocard schematic and 96 way pinout:
viewtopic.php?f=15&t=2119
Starmill (Novamill) Baldor Mach3 conversion:
viewtopic.php?f=45&t=3184
Parker Digiplan stepper drive manuals
viewtopic.php?t=561
Mach3 running unmodified Triac!!!
viewtopic.php?f=47&t=1108
Help with Triac VMC converting to Mach
viewtopic.php?f=47&t=1763
Novamill, first time in cnc (Mach conversion)
viewtopic.php?f=41&t=2263
PKS Digiplan with Mach3
viewtopic.php?f=47&t=929&start=0
viewtopic.php?t=2263

Post Reply