Can you help me identify my machine, and tellme what drivers and software it came with?
Micromill 2000
Ser. # 57598
Denmint v2.0/S/B19-JD5
thanx
paul johnson
Micromill 2000; Ser. # 57598 ; Denmint v2.0/S/B19-JD5
Moderators: Martin, Steve, Mr Magoo
-
Denford Admin
- Site Admin
- Posts: 3635
- Joined: Fri 10 Feb , 2006 12:40 pm
- Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then. - Location: Sunny Brighouse
- Contact:
Re: Micromill 2000; Ser. # 57598 ; Denmint v2.0/S/B19-JD5
It will have run from VR Milling version 2.xx
This is the inspection document but doesn't tell you much more.
This is the inspection document but doesn't tell you much more.
- Attachments
-
- 57598.pdf
- (42.88 KiB) Downloaded 648 times
Re: Micromill 2000; Ser. # 57598 ; Denmint v2.0/S/B19-JD5
It looks as if it will have been shipped with VRMilling Version 2 software.
Re: Micromill 2000; Ser. # 57598 ; Denmint v2.0/S/B19-JD5
It should say on the serial number label on the side of the machine.
The EPROM will work with VR Milling 2 or 5
The EPROM will work with VR Milling 2 or 5