MicroMill and Control Keyboard

All info relating to the Denford MicroMill and MicroTurn lathes and mills

Moderators: Martin, Steve, Mr Magoo

Post Reply
Jeff_HATC
Posts: 20
Joined: Tue 27 Sep , 2011 11:47 am

MicroMill and Control Keyboard

Post by Jeff_HATC » Thu 13 Oct , 2011 16:13 pm

We have a micromill 2000 that is run via serial port.

Can I use one of my denford "desktop tutor" control keyboards to run my micromill?

If so, how would I do this since the micro mill only has 1 serial port.

Martin
CNC Guru
CNC Guru
Posts: 1906
Joined: Fri 24 Feb , 2006 17:09 pm
Location: Brighouse

Re: MicroMill and Control Keyboard

Post by Martin » Thu 13 Oct , 2011 18:41 pm

The Micromill needs conecting to a computer via the serial lead. The desk top tutor can also be connected to the computer on a seperate serial port & will control the machine using dos based software.

Jeff_HATC
Posts: 20
Joined: Tue 27 Sep , 2011 11:47 am

Re: MicroMill and Control Keyboard

Post by Jeff_HATC » Thu 13 Oct , 2011 21:45 pm

Excellent. So I just need a system with 2 serial ports...com1 and com2, yes?

Then.... which software would I pick to run that tutor keyboard to be most compatiable with the micromill?

https://website.denford.ltd.uk/support/9 ... s-software

Post Reply