Micromill - VR CNC Milling v. 2.14 - AES Machine

All info relating to the Denford MicroMill and MicroTurn lathes and mills

Moderators: Martin, Steve, Mr Magoo

Post Reply
Benny
CNC Expert
CNC Expert
Posts: 201
Joined: Fri 20 Oct , 2006 15:27 pm
Location: USA

Micromill - VR CNC Milling v. 2.14 - AES Machine

Post by Benny » Tue 12 May , 2009 21:10 pm

It was suggested to download v. 2.31, but customer declined.

Customer writes in....
In trying to execute the Program DENFORD I keep getting the following error.
I have reset offsets 3 or 4 times
I have re-loaded software
M/C Limit Error
Machine Error: Move Exceeds Limits

Details:
(Machine Units)
>From X0.0000 Y0.0000 Z0.0000
To X-7.4675 Y-0.5079 Z0.0000

(Program Units)
>From X7.8425
To X-7.4675 Y-0.5079 Z0.0000

(Program Units)
>From X7.8425 Y0.9921 Z0.1626
To X0.3750 Y1.5000 Z??????

Please Provide info as what I might do to correct

User avatar
bradders
CNC Guru
CNC Guru
Posts: 1251
Joined: Mon 13 Feb , 2006 12:35 pm
Location: Brighouse, England
Contact:

Post by bradders » Wed 13 May , 2009 7:05 am


User avatar
Denford Admin
Site Admin
Posts: 3632
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Post by Denford Admin » Thu 14 May , 2009 8:44 am

The customer really needs to update the software - this problem is a more than likely a bug which will have been fixed by version 2.31

Post Reply