Micromill Axis Do Not Move in Jog or Auto

All info relating to the Denford MicroMill and MicroTurn lathes and mills

Moderators: Martin, Steve, Mr Magoo

Post Reply
User avatar
boots
CNC Expert
CNC Expert
Posts: 220
Joined: Tue 16 Jan , 2007 21:22 pm

Micromill Axis Do Not Move in Jog or Auto

Post by boots » Mon 09 Feb , 2009 14:57 pm

Customer writes in:

Micromill 2000 NS 11/06
VR Milling v2.31

When we run the program, in the Auto mode, the spindle motor turns on but nothing moves.
Nothing moves in the Jog mode, but we can turn the spindle On.
Last edited by boots on Mon 09 Feb , 2009 17:55 pm, edited 1 time in total.

User avatar
boots
CNC Expert
CNC Expert
Posts: 220
Joined: Tue 16 Jan , 2007 21:22 pm

Post by boots » Mon 09 Feb , 2009 15:01 pm

Check the Feed Rate Over Ride on the front panel of the machine, make sure it is turned all the way to the right (CW).

Click and Drag the slider bar for the feed rate in the Control Panel up to increase the feed rate.

Post Reply