Micro turn

All info relating to the Denford MicroMill and MicroTurn lathes and mills

Moderators: Martin, Steve, Mr Magoo

Post Reply
fis7470
Posts: 3
Joined: Sun 26 Jan , 2014 3:36 am

Micro turn

Post by fis7470 » Mon 30 Jun , 2014 21:07 pm

Hello,
I have a micro turn cnc lathe serial number 6147. I am attempting to learn the software and make sure the machine is operational. I have been able to verify the spindle works and it moves on the y axis. However, when i attempt the home the machine on the x axis it makes noise as if it should be moving but there is no movement. Any ideas on this????
Top
Post Reply

Return to “Micromill / Microturn”