7 segment display

All info relating to the Denford MicroMill and MicroTurn lathes and mills

Moderators: Martin, Steve, Mr Magoo

Post Reply
Kyledye
Posts: 6
Joined: Thu 08 Sep , 2011 16:42 pm
Hardware/Software: Tech mill by broad head Garrett.
Mach S/N SP50326E
Elec S/N DS00221525
Nov 1999
120v 50/60HZ

7 segment display

Post by Kyledye » Tue 04 Oct , 2011 18:12 pm

The 7 segment dispaly is reading".L" not sure what this means. Is there a contact number I can call for technical support? I am located in Wyoming.

User avatar
bradders
CNC Guru
CNC Guru
Posts: 1251
Joined: Mon 13 Feb , 2006 12:35 pm
Location: Brighouse, England
Contact:

Re: 7 segment display

Post by bradders » Wed 05 Oct , 2011 6:11 am

.L. = Software not connecting to the machine control

User avatar
Denford Admin
Site Admin
Posts: 3642
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Re: 7 segment display

Post by Denford Admin » Wed 05 Oct , 2011 8:41 am

I think L appears when the card is waiting for the mint to be downloaded and run.
Can you connect from VR milling (I presume v2)?
Have you checked the RS232 is all connected ?
Has the machine worked previously ?

Post Reply