Micromill 2000 with denstep vrmilling 1.75?

All info relating to the Denford MicroMill and MicroTurn lathes and mills

Moderators: Martin, Steve, Mr Magoo

Post Reply
markp
Posts: 1
Joined: Tue 29 Mar , 2011 9:19 am

Micromill 2000 with denstep vrmilling 1.75?

Post by markp » Tue 05 Apr , 2011 1:55 am

Hi, I have a US market micromill 2000 serial 60182 DOM 2002. I have vrmill 1.75 and the board is a denstep will this software work with this board? I have a straight through serial cable but not the one that came with the machine.

User avatar
Denford Admin
Site Admin
Posts: 3642
Joined: Fri 10 Feb , 2006 12:40 pm
Hardware/Software: Go to User Control Panel > Profile
Enter as much information about your CNC hardware and software as you can - it makes it easier for everyone to know what you're talking about then.
Location: Sunny Brighouse
Contact:

Re: Micromill 2000 with denstep vrmilling 1.75?

Post by Denford Admin » Tue 05 Apr , 2011 9:00 am

Not sure what v1.75 is - are you sure that isn't the DOS software ?
vrmilling will be v2.xx or v5.xx

This guide should help you decide what you have got:
viewtopic.php?f=4&t=116

A pin-pin serial cable should be the right one for a US machine.

Post Reply