EasiMill with PNC3 upload gcode to PNC3 Serial port with python script

All info relating to the Denford EasiMill and EasiTurn lathes and mills

Moderators: Martin, bradders, Steve, Mr Magoo

Post Reply
stergiosa
Posts: 1
Joined: Sun 09 Dec , 2018 20:40 pm
Hardware/Software: CNC Machines. EasiMill with PNC3
Pyhton programming

EasiMill with PNC3 upload gcode to PNC3 Serial port with python script

Post by stergiosa » Sun 09 Dec , 2018 20:48 pm

EasiMill with PNC3 upload gcode to PNC3 Serial port with python script
Everything I need is here :
http://srv1-1sek-ioann.ioa.sch.gr/cnc/

Post Reply