Hi, I have an easiturn 3 with a fagor 8020 control that has just developed a following error X axis problem (070).
When I press manual mode (5) the M/C tries to "home"...... but in the wrong direction in both axis ! It moves about 50mm then stops with the 070 error message.
Can anyone suggest any possible reasons for this????
following error 070
Moderators: Martin, Steve, Mr Magoo
Re: following error 070
We only ever built a few machines fitted with Fagor controls.
It may be worth checking the machine parameters if you have a list.
It may be worth checking the machine parameters if you have a list.