PNC3, Complete, With Drives, Fully working, for sale ??

All info relating to the Denford EasiMill and EasiTurn lathes and mills

Moderators: Martin, Steve, Mr Magoo

Post Reply
johnn1
Posts: 2
Joined: Wed 26 Sep , 2012 16:23 pm
Hardware/Software: Easimill 3, dmc3
Mach3

PNC3, Complete, With Drives, Fully working, for sale ??

Post by johnn1 » Fri 12 Oct , 2012 10:52 am

Hi All
I have decided to update my lathe to use with Mach3

I now have the PNC3 electronics for sale, not sure whatthey are worth. If anyone is interested I could do a paypal sale or put them on Ebay.
I live in North Wales, UK. Would be willing to ship overseas if needed.

What is in the package is:-
PNC3 board
Keyboard
Vidio display
Tape drive, Working I think; New drive belts fitted and runs as it should.
Two stepper drive units and connector board
DB25 for tool changer, tool changer not included but may be later if a fair offer recived.
Most of the interconect cables that are not part of the power supply unit. I have re used that in the upgrade because of the required 8v supply to the encoders etc.

All working perfectly, no faulty keys on the keyboard etc.

Let me know your thoughts
John :3D:

Post Reply