Casting spares or engineering drawings?

All info relating to the Denford Cyclone lathes

Moderators: Steve, Mr Magoo, Martin, bradders

Post Reply
jamesgates1000
CNC Apprentice
CNC Apprentice
Posts: 74
Joined: Sat 01 Aug , 2015 9:23 am
Hardware/Software: 2001 Cyclone with toolchanger and Fanuc 21i control
Serial number - H00913.
Voltage 415V F.L.C 20A 50Hz 3Ph

1997 Triac VMCwith toolchanger and Fanuc O-M control
Serial number - 70826B.
Voltage 415V F.L.C 30A 50Hz 3Ph

Casting spares or engineering drawings?

Post by jamesgates1000 » Mon 28 Jan , 2019 9:55 am

Hi,

a part just came out of the chuck and the dovetail has broken off the x axis nearest the chuck and ballscrew has bent. Ballscrew should be easy to replace but casting trickier. Don't suppose denford would have any spares lying around, or failing that an engineering drawing of this part so that I can make one up?

Post Reply