Loud Buzzing noise coming from cabinet

All info relating to the Denford Cyclone lathes

Moderators: Martin, Steve, Mr Magoo

Post Reply
jamesgates1000
CNC Apprentice
CNC Apprentice
Posts: 89
Joined: Sat 01 Aug , 2015 9:23 am
Hardware/Software: 2001 Cyclone with toolchanger and Fanuc 21i control
Serial number - H00913.
Voltage 415V F.L.C 20A 50Hz 3Ph

1997 Triac VMCwith toolchanger and Fanuc O-M control
Serial number - 70826B.
Voltage 415V F.L.C 30A 50Hz 3Ph

Loud Buzzing noise coming from cabinet

Post by jamesgates1000 » Wed 21 Jun , 2017 11:53 am

Turned my Cyclone on the other day and there was an intermittent buzzing noise, sounds like an electrical buzz. A few days later and the buzz is constant and seems to have got louder, took off all the panels and it seems to be coming from the spindle motor or Z axis motor. Anyone got any idea what this might be?

Post Reply