Page 1 of 1

USB Floppy emulator on my TU150U

Posted: Wed 10 May , 2017 20:35 pm
by Edis
I tested the Gotek USB Floppy Emulator on my Harrison TU150U today, and got it to work. Have not done any longtime test, but it work fine tonight when I was making some test on the lathe.

I tested different setups on different "floppys" on the USB-memory, and the 4th one with DOS 7.1 did work!
Image

Had this floppy before
Image

Looks like this now!
Image

Made a decal with the coordinatesystem tonight too. Newbie-thing :oops:
Image

It´s this kind of emulator:
https://www.youtube.com/watch?v=taFP1J_lZBI

Re: USB Floppy emulator on my TU150U

Posted: Thu 11 Jan , 2018 12:33 pm
by mike2424
Hello
I was wondering how the emulator has been working for you now after a year or so of time passing? I may do the same thing to my Cyclone. Thanks mike

Re: USB Floppy emulator on my TU150U

Posted: Mon 15 Jan , 2018 18:16 pm
by Edis
I haven´t used the machine so much, so I can´t say it´s reliable solution. But it´s has worked the times I´ve been running the machine, maybe 5 times since this thread :oops:

Re: USB Floppy emulator on my TU150U

Posted: Tue 16 Jan , 2018 12:16 pm
by mike2424
Thank you for the info. BTW I had seen in your other post that you have a lot of the keyboard overlay sheets. You by chance wouldn't want to sell me one or 2 would you? I have been cutting up old file folders and drawing the buttons on. Doesn't work to well when you get a spray of coolant on them. I guess I should make a video also, I have been making #10 taper pins out of 316 stainless and they look great. Thanks again. Mike

Re: USB Floppy emulator on my TU150U

Posted: Tue 16 Jan , 2018 17:26 pm
by Edis
I sold an overlay last year to someone here, the shipping was about £5 to GB so I asked for £10 for one overlay. I can send two overlays for £14 (I use Paypal).

Would be nice so se your machine working on Youtube :D

Re: USB Floppy emulator on my TU150U

Posted: Tue 16 Jan , 2018 22:36 pm
by mike2424
Thanks, I sent you a PM. mike