Baruffaldi TOE80 Turret not working properly

All info relating to the Denford Cyclone lathes

Moderators: Martin, Steve, Mr Magoo

Post Reply
malutki69
CNC Apprentice
CNC Apprentice
Posts: 52
Joined: Sat 10 May , 2014 22:35 pm

Baruffaldi TOE80 Turret not working properly

Post by malutki69 » Fri 14 Oct , 2016 14:26 pm

Hello
Recently I bought denford cyclone, but changer does not work properly (sometimes chooses improper tool) Then the red light up on the control board. Lathe is connected directly to Rotary converter 7.5hp. I'm not sure it has an impact on the changer. I checked the voltage on the inverter changer and is good. Please help
Attachments
2016-10-14 12.57.12.jpg
2016-10-14 12.57.12.jpg (295.1 KiB) Viewed 5081 times

Post Reply