Cyclone Fanuc 0T alarm 2006; Spindle failed to reach speed

All info relating to the Denford Cyclone lathes

Moderators: Martin, Steve, Mr Magoo

Post Reply
stevenl
Posts: 23
Joined: Sat 09 Aug , 2014 20:23 pm
Hardware/Software: Denford Triac 1988
Denford Triac ATC 1990
Denford Cyclone

Cyclone Fanuc 0T alarm 2006; Spindle failed to reach speed

Post by stevenl » Sat 11 Jul , 2015 19:38 pm

Suddenly got this problem randomly when a program is running. The spindle is running fine and at set speed. This alarm come and go often.
But i tried to give the control box module a knock and it seems to work. Maybe something is loose in the control panel that effects this? Cant think of anything though.

But another thing, it seems to be better when the spindle have run some time, over 10 minues maybe.

Any suggestions?
11720425_10153350011135240_1665763902_n.jpg
11720425_10153350011135240_1665763902_n.jpg (60.76 KiB) Viewed 3588 times

Post Reply