Harrison TU150U with Baldor servo

[Lone_Ranger]

I used to own 2 Denford Cyclone Lathes

The X axis should show a movement of 2mm when a 1mm cut is programmed, this is because it is working in "diameter mode" which is correct as it should be showing the actual diameter of the material, remember a 1mm depth of cut (X axis movement) will in reality remove 2 mm from the actual diameter of the material, this is normal for most CNC Lathes

Regards
Rob

[Edis]

Thanks, I hoped it was like that

This is my first test in the machine!! I´m happy now

[Edis]

Made a little video too:
https://www.youtube.com/watch?v=vJHr4TvEr2M

I just entered a program from the manual to test, so don´t ask what it is