Cyclone machine parameters

All info relating to the Denford Cyclone lathes

Moderators: Mr Magoo, Martin, bradders, Steve

Post Reply
Martin
CNC Guru
CNC Guru
Posts: 1609
Joined: Fri 24 Feb , 2006 17:09 pm
Location: Brighouse

Cyclone machine parameters

Post by Martin » Thu 19 Aug , 2010 10:10 am

Cyclone OT-A & OT-B/OT-C parameters.
Attachments
CYCLONE.zip
(2.1 KiB) Downloaded 766 times
CYCLONEA.zip
(1.17 KiB) Downloaded 606 times

ti nut
Posts: 8
Joined: Wed 06 Sep , 2017 9:18 am
Hardware/Software: Cyclone TU150-P
Fanuc OT-C

Re: Cyclone machine parameters

Post by ti nut » Fri 12 Oct , 2018 16:35 pm

Hi,

Is there any chance the zip files are corrupted? Tried to download and open both files, with different browsers and unzipping software but both seem to be incomplete/corrupted - 0T-A after #0171 and 0T-B&C after #0507.

There is always the chance that I'm missing something entirely..

Martin
CNC Guru
CNC Guru
Posts: 1609
Joined: Fri 24 Feb , 2006 17:09 pm
Location: Brighouse

Re: Cyclone machine parameters

Post by Martin » Mon 15 Oct , 2018 7:53 am

Have posted again.
Attachments
CYCLONEA.zip
(1.17 KiB) Downloaded 12 times
CYCLONE.zip
(2.1 KiB) Downloaded 11 times

ti nut
Posts: 8
Joined: Wed 06 Sep , 2017 9:18 am
Hardware/Software: Cyclone TU150-P
Fanuc OT-C

Re: Cyclone machine parameters

Post by ti nut » Tue 16 Oct , 2018 9:32 am

Thank you for updating these Martin.

Are there 900 series parameters for the 0T-A? The file for the 0T-B&C have these.

Thank you!

Martin
CNC Guru
CNC Guru
Posts: 1609
Joined: Fri 24 Feb , 2006 17:09 pm
Location: Brighouse

Re: Cyclone machine parameters

Post by Martin » Tue 16 Oct , 2018 10:48 am

The 900 parameters are the Fanuc options so were different on each machine as with the 450 diagnostics.
If you let me have the serial number I may be able to locate a copy.

ti nut
Posts: 8
Joined: Wed 06 Sep , 2017 9:18 am
Hardware/Software: Cyclone TU150-P
Fanuc OT-C

Re: Cyclone machine parameters

Post by ti nut » Tue 16 Oct , 2018 14:13 pm

Thank you for this.

The machine serial number is CY22129 G
It is a Jan '90 build with 0T-A control

Are the 450 diagnostics set based on viewtopic.php?f=33&t=2916 ?

Thank you!

Martin
CNC Guru
CNC Guru
Posts: 1609
Joined: Fri 24 Feb , 2006 17:09 pm
Location: Brighouse

Re: Cyclone machine parameters

Post by Martin » Wed 17 Oct , 2018 7:26 am

Hope this helps.
Attachments
DOC171018.zip
(254.25 KiB) Downloaded 21 times

Post Reply