My cyclone has a 125mm Pratt burnard 3 jaw chuck, just wondered if it is possible to mount a 160mm chuck. Obviously will need to machine a larger adapter plate.
Thought that I had read somewhere the maximum chuck size for a cyclone was 150mm but can't find any info now.
Maximum chuck size
Moderators: Martin, Steve, Mr Magoo
-
jamesgates1000
- CNC Apprentice
- Posts: 89
- Joined: Sat 01 Aug , 2015 9:23 am
- Hardware/Software: 2001 Cyclone with toolchanger and Fanuc 21i control
Serial number - H00913.
Voltage 415V F.L.C 20A 50Hz 3Ph
1997 Triac VMCwith toolchanger and Fanuc O-M control
Serial number - 70826B.
Voltage 415V F.L.C 30A 50Hz 3Ph
Re: Maximum chuck size
Should be possible to fit a larger chuck but the size fitted is set so that any internal tools do not hit the chuck jaws when parting off.
If you use a larger chuck you have to be sure the internal tools are clear of the jaws
If you use a larger chuck you have to be sure the internal tools are clear of the jaws