compact 10000

All info relating to the Denford Compact 1000 and Compact 1000 Pro small routing machines

Moderators: Martin, Steve, Mr Magoo

Post Reply
Large519
CNC Expert
CNC Expert
Posts: 101
Joined: Wed 20 Mar , 2013 22:34 pm
Hardware/Software: Denford Triac PNC3
FeatureCam - CADCAM
Delcam Powershape

compact 10000

Post by Large519 » Fri 29 Nov , 2013 7:33 am

Hi all, some advice plz, currently own a triac but am looking for some thing quicker to aid my production of parts made from Prolab model board, the compact 1000, seems to be a likely contender, obv there is one available on a national auction site, but has not pc to run it, would a standard 32bit w7 pc be suffucient to run , also is connection from pc to machine via a USB cable or r232 cable.

Martin
CNC Guru
CNC Guru
Posts: 1897
Joined: Fri 24 Feb , 2006 17:09 pm
Location: Brighouse

Re: compact 10000

Post by Martin » Fri 29 Nov , 2013 8:17 am

It will be USB.

VRMilling version 5 will run from windows 7. It would be best to update to version 5.54 off the Denford website but you would need the correct licence disc.

Large519
CNC Expert
CNC Expert
Posts: 101
Joined: Wed 20 Mar , 2013 22:34 pm
Hardware/Software: Denford Triac PNC3
FeatureCam - CADCAM
Delcam Powershape

Re: compact 10000

Post by Large519 » Fri 29 Nov , 2013 10:22 am

Ah great thankyou.

Post Reply